Do lab grown diamonds pass a diamond tester? Yes. Lab grown diamonds are real diamond, so they test as diamond on standard thermal testers, and a handheld tester cannot tell them apart from natural diamonds. The one common exception is that some lab grown diamonds containing boron can read as "moissanite" on electrical testers, and only spectroscopic screening devices or a gem lab can confirm whether a diamond is natural or lab grown.
Do Lab Grown Diamonds Pass a Diamond Tester? Why the Answer Is Yes
Lab grown diamonds pass because they have the same physical properties that testers measure in natural diamonds.
The US Federal Trade Commission's Jewelry Guides reserve terms like "laboratory-grown" diamond for products with essentially the same optical, physical and chemical properties as mined diamonds. GIA describes lab grown diamonds as essentially chemically and optically the same as natural diamonds, which is why, in its words, traditional gemological observations and old-style "diamond detectors" cannot separate them. In practice, a handheld tester answers one question: is this diamond or not? It does not answer where the diamond came from.
Types of Diamond Testers Compared
There are three main kinds of testing tools: thermal testers, electrical (multi) testers, and advanced screening devices that use spectroscopy.
| Tester type | What it measures | Lab grown diamond result | Moissanite result | Can it separate lab grown from natural? |
|---|---|---|---|---|
| Thermal tester | How quickly heat moves through the stone | Reads as diamond | Can read as diamond | No |
| Electrical or multi-tester | Heat flow plus electrical conductivity | Usually diamond; boron-containing stones can read as moissanite | Usually flagged as moissanite | No |
| Spectroscopic screener (for example GIA iD100, De Beers SynthDetect) | Fluorescence or luminescence linked to atomic-level defects | Referred for further testing or identified as lab grown | Referred for further testing | Yes, as a screening step |
| Gem laboratory | Advanced spectroscopy and gemological testing | Identified, including growth method | Identified | Yes |
Thermal testers
A thermal tester touches the stone with a heated probe and measures how fast the heat is drawn away. Diamond conducts heat far better than most gem materials, so a fast reading signals diamond. Because lab grown diamonds share this thermal behavior, they pass. Thermal testers are good at ruling out materials such as cubic zirconia and glass, but they cannot tell lab grown from natural.
Electrical conductivity testers and multi-testers
Multi-testers add an electrical conductivity check, mainly to catch moissanite. Most diamonds do not conduct electricity, while moissanite conducts slightly, so a stone that passes the thermal test but conducts electricity is flagged as moissanite. This is where the main lab grown exception appears, covered below.
Advanced screening devices
Screening instruments use spectroscopy instead of heat or electricity. The GIA iD100 uses fluorescence spectroscopy to detect trace lattice defects and returns "Pass" for natural diamonds or "Refer" for stones needing more testing, in under two seconds, for diamonds as small as 0.9 mm. De Beers' SynthDetect 2, announced in September 2026, returns "natural," "synthetic" or "refer" for diamonds from 0.001 to 10 carats, and De Beers says all simulants, including moissanite, receive a "refer." De Beers' AMS2 uses time-resolved photoluminescence to screen small melee diamonds. These devices are used by jewelers and manufacturers rather than shoppers.
Why Some Lab Grown Diamonds Test as Moissanite
Some lab grown diamonds contain trace boron, which makes them electrically conductive, so a multi-tester can mistake them for moissanite.
Pure diamond is an electrical insulator. Boron changes that. GIA's 2017 review of HPHT-grown diamonds found that a majority of colorless HPHT samples it examined were type IIb, meaning they contained small amounts of boron that were not enough to make them look blue. The Gem Academy, citing that GIA work, reports that about 70% of colorless HPHT lab grown diamonds passing through GIA's lab contained boron, and that such stones can test as "moissanite" on electrical probes and dual thermal and electrical testers. It adds that some CVD-grown diamonds now show the same behavior.
If a stone sold as a lab grown diamond reads as moissanite, it is not automatically a fake. The next step is a check by a gemologist, who can look for the optical differences described below, or a report check to confirm the stone's identity.
Why Moissanite Can Fool a Thermal Diamond Tester
Moissanite conducts heat so similarly to diamond that it can pass a thermal probe, which is why moissanite-specific testers were developed.
When near-colorless synthetic moissanite entered the jewelry market in the late 1990s, GIA researchers reported that its thermal properties were close enough to diamond that it passed as "diamond" on a thermal probe. The manufacturer at the time released a separate tester designed to separate moissanite from diamond after a stone had already tested as diamond on a thermal probe. Modern multi-testers combine both checks in one device.
A trained gemologist can also separate the two without a tester. GIA's research notes that moissanite is doubly refractive, so facet edges can appear doubled under a loupe or microscope, while diamond is singly refractive. Moissanite also has a lower specific gravity (3.22) than diamond. For a full breakdown, read our guide on whether moissanite passes a diamond tester and our comparison of moissanite vs lab diamonds.
How Labs Tell Lab Grown from Natural Diamonds
Gem labs identify lab grown diamonds by studying atomic-level defects and growth features with spectroscopy and advanced imaging.
GIA explains that the types, distribution and concentrations of tiny atomic irregularities, called defects, reveal whether a diamond grew in the earth or in a lab. Using a combination of gemological and spectroscopic techniques, GIA can also determine whether a lab grown diamond was produced by HPHT (high pressure, high temperature) or CVD (chemical vapor deposition). De Beers' DiamondView instrument images surface luminescence, which reveals growth patterns used to help separate lab grown from natural diamonds.
This is why a grading report matters more than a tester result. A lab grown diamond report confirms laboratory-grown origin. Grown Leo's loose lab grown diamonds come with IGI reports, which you can check online by report number.
What This Means for Buyers
A diamond tester confirms a lab grown diamond is diamond, but only a report or lab-grade screening confirms it is lab grown.
- Passing a tester is expected. A lab grown diamond should read as diamond on a thermal tester.
- A "moissanite" reading is not proof of a fake. Boron-containing lab grown diamonds can trigger it on electrical testers.
- Check the paperwork. Verify the report number online and match any girdle inscription to the report.
- Disclosure is required. Under FTC guidance, sellers must clearly disclose that a diamond is laboratory grown, using a qualifier immediately before the word "diamond."
To learn more about how lab grown and natural diamonds compare beyond testing, see our lab grown vs natural diamonds guide, or browse lab grown diamond engagement rings.
Frequently Asked Questions
Will a lab grown diamond pass a jeweler's diamond tester?
Yes. Lab grown diamonds have the same thermal properties as natural diamonds, so they read as diamond on standard thermal testers used by jewelers. A handheld tester cannot tell whether the diamond is lab grown or natural. That requires a spectroscopic screening device, such as the GIA iD100, or testing at a gem laboratory.
Can a diamond tester tell if a diamond is lab grown?
No. Standard thermal and electrical testers only indicate whether a stone behaves like diamond or moissanite. GIA notes that old-style diamond detectors cannot separate lab grown from natural diamonds because they are essentially chemically and optically the same. Spectroscopic screeners and gem labs detect lab grown diamonds by analyzing atomic-level defects in the crystal.
Why did my lab grown diamond test as moissanite?
Some lab grown diamonds, especially HPHT-grown stones, contain trace boron, which makes diamond electrically conductive. Multi-testers flag electrically conductive stones as moissanite, so a boron-containing lab grown diamond can give a false moissanite reading. A gemologist can confirm identity by checking for double refraction, which moissanite shows and diamond does not, or by verifying the report.
Does moissanite pass a diamond tester?
Moissanite can pass a basic thermal diamond tester because its thermal properties are close to those of diamond, as GIA researchers reported when synthetic moissanite was introduced. Multi-testers that also measure electrical conductivity usually identify moissanite, because moissanite conducts electricity slightly while most diamonds do not. A gemologist can also spot its double refraction under magnification.
How do gem labs detect lab grown diamonds?
Gem labs such as GIA use spectroscopy and other advanced methods to study atomic-level defects and impurities that differ between natural and lab grown diamonds. These methods can also reveal whether a lab grown diamond was made by HPHT or CVD. Luminescence imaging tools such as De Beers' DiamondView also help separate lab grown stones from natural ones.
Can I test a lab grown diamond at home?
Home methods cannot reliably confirm whether a diamond is lab grown or natural, because lab grown diamonds share diamond's physical and optical properties. A consumer thermal tester can indicate diamond versus simulant, but not origin. The most reliable checks are verifying the grading report number online, matching the girdle inscription, and asking a jeweler with a spectroscopic screener.
Sources
- FTC: In the Loupe, Advertising Diamonds, Gemstones and Pearls
- GIA: iD100 Gem Testing Device
- GIA 4Cs: Simulants, Moissanite and Lab-Grown Diamonds
- GIA Gems & Gemology: Synthetic Moissanite, A New Diamond Substitute (Winter 1997)
- GIA Gems & Gemology: Observations on HPHT-Grown Synthetic Diamonds, A Review (Fall 2017)
- The Gem Academy: Laboratory-Grown Diamonds That Do Not Test as Diamond
- Brilliant Earth: Do Lab Grown Diamonds Pass a Diamond Tester?
- National Jeweler: De Beers Releases New Diamond Screening Machine, SynthDetect 2
- De Beers Group Verification: AMS2
- De Beers Group Verification: SynthDetect
- Cardiff University / De Beers: Separation of Natural from Laboratory-Grown Diamond
- Cullen Jewellery: Can Moissanite Pass a Diamond Tester?