Princess Cut Diamond Guide: Ratio, Corners, Sizes and Comparisons

Grown Leo 0 comments

A princess cut diamond is a square brilliant cut with sharp, pointed corners, known technically as a square modified brilliant. For a square look, choose a length-to-width ratio of 1.00 to 1.05, and make sure each of the four corners is covered by a prong or bezel, because the points are the most chip-prone part of the stone. The princess cut also tends to cost less per carat than a round because cutting it keeps more of the rough crystal.

What Is a Princess Cut Diamond?

A princess cut diamond has a square (or slightly rectangular) outline with brilliant-style faceting, so it sparkles more like a round brilliant than like step cuts such as the Asscher. Seen from the side, it resembles an inverted pyramid, and from above its facets form an X shape across the stone.

The pavilion (the underside) carries chevron-shaped facets that drive its sparkle. According to the International Gem Society, a princess cut can have two, three or four chevron patterns:

  • Two chevrons: larger, bolder flashes of light and color.
  • Four chevrons: more sparkle in smaller pieces, sometimes described as a "crushed ice" look.
  • Three chevrons: a middle ground.

The International Gem Society treats the chevron count as a matter of taste rather than quality. The number is often visible on the plotting diagram of a grading report.

A Brief History

The name "princess cut" dates to the 1960s, when it was used for a square cut called the profile cut, designed by London cutter Arpad Nagy. Later square cuts such as the Barion and Quadrillion paved the way for the modern version, which Wikipedia credits to Betzalel Ambar, Ygal Perlman and Israel Itzkowitz in 1980. Its popularity peaked in the 1980s and 1990s, and Wikipedia cites a 2015 figure placing it second only to the round in engagement ring share.

Princess Cut Diamond Ratio: Square vs Slightly Rectangular

For a princess cut that looks square, choose a length-to-width ratio of 1.05 or less. The International Gem Society says stones above 1.05 start to look off-square, and that a rectangular princess should be at least 1.20 so it reads as clearly rectangular rather than slightly misshapen.

L:W ratio Appearance Recommendation
1.00 to 1.05 Square to the eye The classic princess look
1.06 to 1.19 Neither square nor clearly rectangular Usually best avoided
1.20 and above Clearly rectangular A deliberate rectangular style

To work out the ratio, divide the longer side by the shorter side using the measurements on the report.

Protecting the Corners

The four pointed corners are the weakest part of a princess cut diamond, so they should always be covered. GIA recommends round, claw or, ideally, V-shaped prongs at the corners, and notes that a bezel setting offers maximum protection. The International Gem Society adds that the corners can snag and chip and should always be protected with prongs.

  • V-prongs (chevron prongs): wrap each corner and are the most common choice for solitaires.
  • Bezel: a metal rim that covers the whole edge, good for active lifestyles.
  • Girdle check: the International Gem Society advises avoiding girdles graded "Extremely Thin," which make the stone more prone to breaking.
  • Inclusion placement: avoid inclusions near the corners, where they can add to the risk of chipping.

The International Gem Society also notes that crowns with "bezel corners" (kite-shaped facets running to the corners) are more durable than "French corners," so they are the safer pick unless you prefer the French look.

Clarity, Color and Value

A princess cut hides inclusions well. GIA notes that its pointed corners help conceal inclusions, so you may be able to choose a lower clarity grade than you would for a step cut and save money. The International Gem Society calls SI1 or VS2 a sweet spot for eye-clean stones, while noting that princess cuts show body color more than rounds do.

On value, GIA explains that princess cuts usually cost less per carat than round brilliants because the cutting process preserves more of the rough diamond. GIA also notes that their deeper pavilions can make them look slightly smaller face-up than a round of the same weight.

Grown Leo's IGI certified loose princess cut lab grown diamonds are D to F color and VVS1 to VS2 clarity with an Excellent cut. IGI has included the princess among the fancy shapes it can give a cut grade since 2022, and JCK reports that its process checks that the pavilion chevrons are even.

Princess Cut Diamond Size Chart (0.5 to 5 Carats)

A 1 carat princess cut diamond measures about 5.5 x 5.5 mm face-up, and a 2 carat about 6.9 x 6.9 mm, based on Grown Leo's size chart. Exact dimensions vary with each stone's depth.

Carat weight Approximate face-up size (length x width)
0.5 ct 4.4 x 4.4 mm
0.75 ct 5.0 x 5.0 mm
1 ct 5.5 x 5.5 mm
1.25 ct 5.9 x 5.9 mm
1.5 ct 6.3 x 6.3 mm
1.75 ct 6.6 x 6.6 mm
2 ct 6.9 x 6.9 mm
2.5 ct 7.4 x 7.4 mm
3 ct 7.9 x 7.9 mm
3.5 ct 8.4 x 8.4 mm
4 ct 8.7 x 8.7 mm
4.5 ct 9.1 x 9.1 mm
5 ct 9.4 x 9.4 mm

See these sizes on a hand with the diamond size chart and on-hand simulator, and estimate cost with the lab grown diamond price calculator. Moissanite is less dense than diamond (specific gravity 3.22 versus 3.52), so a princess cut moissanite of the same millimeter size weighs fewer carats.

Princess vs Cushion vs Asscher

All three are square-looking shapes, but the princess has sharp corners and brilliant faceting, the cushion has rounded corners, and the Asscher is a step cut with cropped corners.

Feature Princess Cushion Asscher
Faceting style Brilliant (square modified brilliant) Brilliant or modified brilliant Step cut
Corners Sharp points Rounded Cropped (octagonal look)
Look Bright sparkle, X pattern Soft outline; modified versions show a "crushed ice" effect Hall-of-mirrors flashes and a windmill or X pattern
Inclusion visibility Corners help hide inclusions (GIA) Brilliant faceting Shows inclusions more; GIA suggests VS2 or better
1 ct approx. size 5.5 mm 6.0 mm 5.5 mm
2 ct approx. size 6.9 mm 7.5 mm 6.9 mm

Choose a princess if you want maximum sparkle in a crisp square, a cushion if you prefer softer corners, and an Asscher if you like the calm, geometric look of a step cut. For more on the cushion, read our comparison of cushion vs round diamonds, or browse all shapes in our engagement ring shapes guide.

Princess Cut Lab Grown Diamond and Moissanite Rings

Princess cuts suit solitaires, halos and three-stone rings, as long as the corners are protected. Shop princess cut lab grown diamond rings or princess cut moissanite engagement rings, offered in US sizes 4 to 12.

Frequently Asked Questions

What is the ideal ratio for a princess cut diamond?

For a princess cut that looks square, choose a length-to-width ratio between 1.00 and 1.05. The International Gem Society says stones above 1.05 begin to look off-square, and recommends at least 1.20 if you want a deliberately rectangular princess. Ratios between about 1.06 and 1.19 tend to look neither square nor clearly rectangular.

Do princess cut diamonds chip easily?

The sharp corners are the most vulnerable part of a princess cut diamond, so they can chip if left exposed. GIA recommends V-shaped prongs at the corners or a bezel setting for maximum protection. Also avoid stones with an extremely thin girdle or inclusions near the corners, which the International Gem Society says increase the risk of breakage.

Is a princess cut cheaper than a round diamond?

Usually, yes. GIA explains that princess cuts tend to cost less per carat than round brilliants because the cutting process preserves more of the rough diamond. Keep in mind that a princess may look slightly smaller face-up than a round of the same weight because of its deeper pavilion, so compare millimeter sizes as well as carat weight.

How big is a 1 carat princess cut diamond?

Based on Grown Leo's size chart, a 1 carat princess cut diamond measures about 5.5 x 5.5 mm face-up, and a 2 carat about 6.9 x 6.9 mm. For comparison, a 1 carat round measures about 6.4 mm across. Actual measurements vary with each stone's depth, so check the report dimensions before buying.

What is the difference between a princess cut and an Asscher cut?

Both look square, but a princess cut uses brilliant faceting and has sharp, pointed corners, which gives it lively sparkle. An Asscher cut is a step cut with heavily cropped corners, producing broad flashes and a windmill or X pattern. Asscher cuts show inclusions more easily, so GIA suggests VS2 clarity or better for them.

What clarity is best for a princess cut diamond?

Princess cuts hide inclusions well because of their brilliant faceting and pointed corners, according to GIA. The International Gem Society calls SI1 or VS2 a sweet spot for an eye-clean stone at a fair price. Whatever the grade, avoid inclusions near the corners, where they are more noticeable and can weaken the stone.

Sources